› WELCOME TO THE ANTIC MONTHLY DISK ›   ¨ã©±¹¸¸¬ Áîôéã Ðõâìéóèéîç Éîã®   ››Most of the programs on this disk are›written in Atari BASIC. Some require›special hardware or specific operating›instructions. Please read the matching›issue of ANTIC Magazine for complete›documentation.››SUBSCRIPTION Info & Orders:›(800) 347-6969.››BACK ISSUE Orders: (800) 234-7001›(Visa or Mastercard only, please.)››XXX›ý *** BONUS FILES * BONUS FILES ***ý›› We've included the five›Micropainter files used in the›HARDWIRE article. ANTIC.MIC and›STARS.MIC were used to tile the›floor and ceiling of the room.› ONE.MIC, TWO.MIC and›THREE.MIC depict a sphere›descending from the top left corner›of the back of the room, to the›lower front right corner of the›room.›››XXX››ý *** > MORE BONUS FILES < ***ý›› If you're unhappy because›your Atari 400 or 800 can't RUN›HARDWIRE, here's the next best›thing.› We've included our popular›FADER II slideshow program, which›you can use with the HARDWIRED›picture files (above). FADER›will work on your 400 or 800.›XXX› Here's how to do it:›› 1. Get another disk and›format it with DOS 2 or 2.5, then›Write The DOS Files to this disk.›› 2. Next, copy FADERII.EXE›and all the picture files to this›disk. (Hint: All of the picture›filenames end with ".MIC")›XXX› 3. Now, rename FADERII.EXE›to AUTORUN.SYS. Next, turn off›your Atari, remove all cartridges›(XL/XE owners hold down [OPTION])›and turn on your Atari. The FADER›program will automatically load›and run.›› You can also use FADER II to›view any other Micropainter or›Micro Illustrator (Koala) picture›file. Micro Illustrator picture›filenames should end in ".PIC"›and Micropainter filenames can›end in ".MIC".›XXX››››› For complete information, read›the FADER II documentation from the›previous menu.››››ýýý››XXX››The menu that appeared on the screen›when you booted the disk will only›RUN programs with a .BAS extender.›If you try to run a program and the›response is 'cannot run Filename',›check the file extender with this›list:›XXX›››.BAS BASIC saved program, use menu› RUN or LOAD and RUN.›.LST BASIC listed program, ENTER› then RUN.›.EXE Assembly language 'Load and› Go' file. Remove BASIC, boot› DOS, type L then enter the› filename.›.ASM Assembly language source code› (Atari Assembler Editor)› Must be compiled.›.M65 "SAVEd" MAC/65 assembly › language source code.› Must be compiled.››XXX››.PIC A picture file created with› Micro Illustrator software.›.MIC A picture file created with› Micropainter software.›.OBJ Machine language object file.› Same as .EXE but not 'Load and› Go'. See corresponding article.›.SYS Reserved for DOS system files.›.TXT Text file. Usually accessed› by another program.›.ACT ACTION! language source code.› Must be compiled.›.LGO A Logo program. Requires the› Logo cartridge.››XXX››All programs from ANTIC issues dated›prior to August 1984 were reproduced›from ANTIC's Archive. We've updated›them from our HELP columns and›most are compatible with the XL and›XE machines. We have worked to insure›that our programs operate as›published, but we consider all our›software listings to be works in›progress which we encourage you to›personalize and enhance.››Good luck, and ENJOY!›› -ANTIC ED››